Wireless Remote Control Pipe Welding Rotator Heavy Duty Rollers for
Auto Seam Welding
Attention More More products pics.pdf
1. Movable rotators can auto move on the rails for the third single
pipe butt welding.
2. It will be controled by Hand Remote Control Box or Wireless
3. During two single pipes butting , the position could not butt
well sometimes , our rotators can adjust the
butt position up or down / left or right to realize the perfect
4. Two self aliging rollers in the two end, and two hydrulic adjust
rollers in the middle to adjust the butt positon.
1. Consist : One powered roller , One idler roller , Two Hydrulic
Adjustment Roller , Electric control system
2. Adjust way : Adjust the pipe diameter automatically with
diameter 750 - 4800 mm
3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available
4. Control Way : Remote hand control box / Wireless hand control
5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for
Nonferrous Metals )
6. Original : Wuxi Success Machinery Equipment Co Ltd / Pipe
Roller Diameter (mm)
Roller Width (mm)
Working Range (mm)
Roller Speed (m/h)
1 - 1000 mm/min
Motor Power (kw)
□ Moving wheels □ Wireless Control □ Remote Control
1. For pipe support and turning for auto seam welding
2. To make wind tower
3. For auto circle seam welding
4. Controlled by foot pedal / hand control box
More Questions Customers May Concerned
Q : What about the transportion?
A : 1. Fully packaged in wooden case to anti damage during the
transportational process .
2. Usually we take seaway ,cause its more convenient and cheaper
for big machine.
3. Door to door delivery service is also available.
Q : What is your warranty and after sale service ?
A : 1. All our equipments with One Year Warranty time , fully test
at our work shop before delivery.
2. If you have any questions on the installation , you will get our
engineers respond within 24 hours.
Details Control system and Brand
1. Inverter is from Taida / Yaskawa Brand
2. Motor is from CE Invertek Brand
3. Reducer is from Cable. Made in China.
4. Electric system is from Schneider
1. Normally under 60 T model we use the Rubber material rollers ,
upper we use Steel material rollers.
2. If your work piece material is Nonferrous Metals , we suggest PU
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw
adjustment / Fit up rotators all available.
DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.